Here Is Where Pulsed UV Light Is the Superior Choice for Curing

• Where products must be cured at low temperatures
• Where thick or opaque substrates must be penetrated
• Where instant on/off is imperative or desirable for start-stop-start process control
• Where the curing process must accommodate odd product shapes or sizes
• Where wide spectral bandwidth coverage is required
• Where the cure area requires a similar lamp configuration
• Where micro alignment requires an instant cure
• Where simultaneous curing of multiple components is required
• Where there is a need to reduce rejects caused by a poor curing process
• Where multiple systems costs are unacceptable
• Where use of mercury is unacceptable
• Where energy saving is important

Here Is Where Pulsed UV Light is being used

• Optical disc storage media

o CD lacquer curing
o DVD Bonding
o Blu-ray Disc™ top-coat curing

• Lubricious coatings on hard drive
• Medical device manufacturing

o Hydrogels
o Lubricious coatings on guide wires

• Semiconductor

o Wafer manufacturing
o Tape removal

• Curing heat sensitive materials