RC-600

General Description

The RC-600 is a Pulsed UV Curing System incorporating the most advanced technology available and designed to produce a broad spectrum of high intensity pulsed UV light. The complete system consists of an electronic power supply/controller, a lamp housing assembly with 10" linear lamp and self-contained cooling, and interconnecting cables. Options include multi-spectrum lamps, circular lamps and an eight position light guide adapter. The RC-600 provides all the advantages inherent in pulsed UV curing over conventional curing methods.

Features	Advantages	Benefits
High Peak Power	Penetration	Deep Cure
Narrow Pulses	Low Heat	No Thermal Damage
Instant On/Off	Process Control	Safety & Long Lamp Life
Broad Spectrum	Wavelength Selection	Formulation Flexibility
Pure Lamps	No Mercury, Microwaves	Safe, Clean Environment
XENON Lamp Design	Custom Shaped Lamps	Efficient Optical Coupling

Top of Page

Power Supply/Controller

Part Number	490-0103
Power Input	120/240 VAC, 50/60 Hz, 12/6 Amperes
Pulse Rep Rate	120 pps @ 60 Hz 100pps @ 50 Hz
Pulse Width	25 micro-sec
Power Output	600 Watts, maximum
Size	9.0" (22.9 cm)Height X8.0" (20.3 cm)Width X16.0" (40.6 cm) Depth
Weight	55 LB(25 kg)
Front Panel Controls	On/Off - Cure Start - Time Set - Timed/Continuous
Front Panel Indicators	Power - Curing - Cure Time
Front Panel Connector	Auxiliary Input/Output
Back Panel	Line Cord - Voltage Selector - Fuses - Ground Stud, Lamp Housing Connectors

Top of Page

Standard Lamp Housing Assembly

Part Number	860-0032
Size	7.75"(19.7 cm)Height X 13.75"(30 cm) Width X 7.0"(17.8 cm) Depth
Weight	25 LB (11.4 kg)
Lamp P/N's	890-1742(240nm cut-off); 890-1743(190nm cut-off)
On/Off Time	Almost Instantaneous
Duty Cycle	100%
Working Distance	.25" to 1", typical
Exposure Area	1"x10"    @ 1"
Average Power	600 Watts
Peak Power Density	405 W/cm squared